Moran Stone
Moran Stone finish consists of stone aggregates embedded in a Moran Base Polymeric Coat.
Uses and application
- Moran Stone aggregate sizes vary from 1.0mm to 6.0mm. The bigger the aggregate the thicker the Moran Basecoat required to support it.
- These aggregates can be used on both internally and externally and on new or previously painted surfaces.
- These aggregates are in a selected range of colours.
- Applied by a roller, steel trowel and a hopper gun.
Uses and application
| AGGREGATE SIZE (MM) | 1.5 | 3.2 | 4.8 | 6.0 |
|---|---|---|---|---|
|
WT - SQ METER/KG |
3.0 |
4.0 |
6.0 |
8.0 |
|
BASE COAT THICKNESS (MM) |
1.0 |
1.5 |
2.0 |
3.0 |
Samples
APPLICATION & SPREADING RATES (1.5MM - 6.0MM)
| COATING | COVERING CAPACITY | APPLIED BY |
|---|---|---|
|
Moran primer |
2 Sq Meter/litre/coat |
Roller |
|
Basecoat |
1.0 - 3.0 kg/Sq Meter |
Trowel |
|
Stone Aggregate 1.5 mm 3.2 mm 4.8 mm 6.0 mm |
4kg/Sq Meter 6kg/Sq Meter 8kg/Sq Meter 10kg/Sq Meter |
Hand Broadcast / Hopper gun 3kg/Sq Meter |
|
Moran seal |
2 Sq Meter/litre/coat |
Spray/Roller |